Question about Intermatic Hardware & Accessories
...the correct time of day.Make sure all pins are up.Push down a pin at the time you want to turn ON your load.Push down a pin at the time you want to turn OFF your load.Plug everything in.Good Luck, ...
...push down the pins that represent the time period you want the appliance ON. For example, if you want a lamp on from 7pm to 10pm, push down the pins between the 7 and 10 on the black portion of the ...
...pins pulled up. Push the segment pins down for the period of time you want the timer to be ON. Each segment pin represents 30 minutes. 2 segment pins = 1 hour. Repeats daily.
3. To connect the ...
Question about General Electric Hardware & Accessories
...Model 15119 instructions pull the pins up for off, down for all, so pull all the pins up then push down the pins for the time you wan the time on how to program the 24 hour ge mechanical timer plug ...
Question about Woods Hardware & Accessories
...push segmehnt pins on tm1702 outdoor times the segment pins are in the gray ring underneath the timer dial just push down the sections that corespond with the time that you want whatever you have ...
Question about Intermatic Hardware & Accessories
...pins down to bypass watering but it watered anyway. Is this a defective unit? It is brand new.. Thank you. I think this is how it should operate: When the day skipper pin is pushed down on ...
Question about Hardware & Accessories
...push the pins down to set start & sto time. I can't press them down. What am I doing wrong ? Maybe lift them up? Following link has pictures showing how to set analog timer and identify type of ...
Question about Whirlpool Hardware & Accessories
down and turned counter clockwise. just turns. what to do? push knob in ,with the front panel unscrewed lift up to back side of the knob,there is a black plastic pin in the center of the knob.pull the
...pins" are the 48 little tabs that are around the clock dial. That would be 2 in every hour of the 24 hour day. Push down a pin to start the device that you want to control and pull up the pin at the ...
37 questions posted
Usually answered in minutes!
77 Questions
56 Questions
42 Questions
30 Questions