Honda Landa PG 3500 PSI Pressure Washer "new washer stopped running" Questions

Ad

new Karcher pressure washer won't start I also have a new Karcher pressure washer with Honda 160gcv motor. Gas is getting into the carbarator bowl but it won't start. We used starting fluid to get it ...

Ad

...Could also be crack/leak in HP pump. If it were left in cold weather without antifreeze, I'd check there first. Part + labor might warrant new washer if more than a couple years

Ad

...New stop switch won't move when lever is turned to stop position. Old stop switch tried to fall out when lever is turned to stop position. Engine will not shut off without pulling plug wire. This ...

Question about Briggs & Stratton Garden

1 Answer

...use a new rubber washer to make a good seal on the supply hose on both ends. if either end leaks or can **** air, just a little bit of air into the pressure washer will cause it to loose

...washer was running but there was no power from the nozzle. I stop the gun trigger, remove the nozzle , it works for 1 minute and stop working again Now the washher pressure turns off on its own after ...

...washer runs until I connect the feed hose than it stops immediately - any ideas?? Dear Davidandkath, I am assuming that by feed hose you mean the water supply inlet. Well if you connect the water ...

Question about Briggs & Stratton Garden

1 Answer

Model # 580752400. Just installed new pump assembly and engine runs ruff. When I turn on the water the engine stops...I cleaned the spark plug and its has been sitting for three years. The gas is new ...

...very clear your explanation of the problem but what type washer do you have first? It sounds like you have a bad unloader or need a new variable nozzle tip. Can you explain in more clear detail. ...

...be a bit expensive for budget models pressure washers that its relating not worth a repair . if a new pressure washer is cheep. it depends on the user and his priority on which he used the

oil runs out under flywheel when motor starts honda GCV 160 pressure washer stopped blew 2 control valves Your top seal on the mower motor is faulty...replace with new seal...

Not finding what you are looking for?
Honda Landa PG  3500 PSI Pressure Washer Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Jesse Walters
Jesse Walters

Level 2 Expert

337 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...