Magellan RoadMate 300 GPS Receiver "reset button" Questions

button marked "Reset" on the left, right or bottom of the unit. 2: Using a thin object, such as a paper clip, depress the button for two to three seconds. The unit should reset. 3:If the unit does not

...reset button on the unit base. It looks no bigger than a pin head and is usually recessed. Turn on and take a straightened paper clip or cocktail stick, press into and keep pressed the reset button ...

...RESET BUTTON is on the right side inside a small hole; the use of a pointed object (tip of a pencil, a ball-pen, etc.) is required to apply pressure on this button in order to perform the RESETTING ...

...reset button with this model. Even the manual says nothing about a reset button. Help!!! There is a reset on your unit located on the side, below the SD card slot. A straighted paper clip should do ...

I FLY700 SCREEN WENT BLANK IS THERE A RESET BUTTON Not sure if this is applicable to your model, but many units will reset after holding the power button for 10-15 seconds.

...reset button on a Magellan RoadMate 300 I bought this unit at a flea market and have nothing but the mount and the powercord for the car. I have no idea how to reset it and Magellan tech support was ...

How do I get rid of the don't restart and restart buttons so my unit will just reset to originsl first time use??? repeatedly get content discovered message with restart and don't restart. S ...

...reset button, (either on the bottom or on the side)the little pinhole, and use a paper clip to depress the reset button. bill It might be a software problem or a glitch during the bootup. Try ...

reset button for a magellan roadmate 1440 Hi allen, Magellan RoadMate models 1340, 1440, and 1470 are normally reset as follows: The reset button is located on the right side of the unit. Press a ...

button which is on top of your unit. Once your in the "hidden" menu, select reset user data.. your unit will reset and everything will be clean. If your trying to delete specific addresses I would use