...PUT NEW PISTON AND HEAD I INSTALLED NEW PISTON AND HEAD AND IT WONT START Do you mean that you replaced the piston and cylinder? The head is built into the cylinder. If you did change these did you ...
I have put a new cylinder,piston,rings,gasket,and carb on this ts 760 and it is still bogging out when i try to cut. try carb adjustment or carbon buildup behind muffler
Question about Stihl Saws
...put in new main bearings, new oil seals, crank was ok, new little end bearing, new piston crown, new rings, cylinder was ok, renewed all gaskets, fitted new carb, new air filters, new fuel filters, ...
new piston and cylinder. Also another thing to check is the carburetor. With the new fuel with ethanol/methanol in it, it can damage parts in the carburetor. The sealant that went over the welch plugs
...New is 160 psi, operational but problematic (hard start) 130~140 and completely toast at 90. This saw is easy to flood when compression has fallen off. Cold start, 3 pulls choke on with the throttle ...
27 questions posted
Usually answered in minutes!
31 Questions
33 Questions
35 Questions
15 Questions