Makita concrete saw, no spark, new ignition coil. I'm wondering if the flywheel magnets have deteriorated. Check clearance between the coil and magnet, too far away and magnetic field ...
Ive got a Makita concrete saw DPC 7311,it says a mix of 100:1 but thats alot ? The manual says to mix it 100:1 if using Makita high performance oil or 50:1 using regular Makita 2 stroke oil. I'd go 50
Stihl gas powered cut off saw. Blades wobble, I had this problem before and had it repaired at United Rentals. I now have a mechanic who can do the work, but I can not remember what was replaced, some
saw starts but wont build up any power it fouled two plugs back to back do i have gas mixture wrong sounds like a rich mixture stihl and huskvarna oil has the same makeup dealers have test tubes for ...
Hi, My Stihl TS400 with 14" Hi, My Stihl TS400 with 14" the original diamond blade saw worked for the while, but during cutting 1- 1/4" thick slab stopped working. (Blade stop turning inside
spark plug fouls out after 5 minutes of running If plug is sooty, this is due to mixture being too rich. This can be caused by dirty air filter, Clean or replace the filter and if this doesn't improve
Stihl concrete saw looses power poss draging in air, or carb problem
Question about Husqvarna Saws
i have a husqvarna partner K960 concrete saw that the skirt of the piston on the exhaust side has shattered, there is no scoring in the bore, the actually sides of the piston above the damage has no ...
Why TS 400 Cut Off SAW- runs but has no power- what is wrong? first the H screw adjustment can be have been wrong (for a while? if it sounds maybe also too smooth turn it some counterclockwise until ...
41 questions posted
Usually answered in minutes!
31 Questions
35 Questions
15 Questions
21 Questions