LG LP XG2 Multimedia Projector "lamp not" Questions

Ad

Question about Christie Office Equipment & Supplies

1 Answer

...Lamp 1 not installed 26 Lamp 1 Interlock: door open, lamp not installed 27 Unable to turn lamp 1 ON 28 Lamp 1 shut off unexpectedly 29 Lamp 1 driver overheated 2A Lamp 1 driver operation error (e.g. ...

Ad

Question about Dell Office Equipment & Supplies

1 Answer

...lamp will not even attempt to light. Anything else I can check? Hi, did the old lamp fail? Or did the lamp light just come on? Firstly I would disconnect the mains and carefully put the old lamp back ...

Ad

Question about Sanyo Office Equipment & Supplies

2 Answers

...lamp does not come on when turned on for some reason. The lamp replacement light is not indicating in yellow at all. So I presume the lamp is fine. have you ever seen the lamp come on? has the unit ...

Question about Panasonic Office Equipment & Supplies

1 Answer

...lamp will not come on and the lamp it self does not come on. if the lamp warning light is flashing, this indicates a defective ballast (lamp power module). if the lamp warning light is lit steadily, ...

Question about Hitachi Office Equipment & Supplies

1 Answer

...lamp is not on, I have Hitachi CP-S225 LCD Projector Fan running but the lamp is not on, I have replaced the lamp but still not working! Hello : Please check on of these solutions : 1:Remove the lamp ...

Question about InFocus Office Equipment & Supplies

1 Answer

...lamp does not work, I cannot confirm the reset of the lamp hours ... I took the projector covers off to see if the "VOLUME -" switch was not making contact (which would create the condition where the ...

Question about Dell Office Equipment & Supplies

1 Answer

...lamp will not seat, or go into the female receptor. I have tried some pressure but as these lamps are not cheap I did not want to push too hard. There is a screw that holds the male part to the buld ...

Question about ASK Proxima Office Equipment & Supplies

5 Answers

...lamp. ? Do not drop the lamp module. The glass may shatter and cause injury. ? Do not touch the glass lamp screen. Fingerprints can obscure projection sharpness. ? Be extremely careful when removing ...

Question about BenQ Office Equipment & Supplies

1 Answer

lamp is not replaced as this could cause damage. 8. Resetting the lamp counter i. Press and hold the Exit 5 button on the projector for 5 seconds to display the total used lamp time. ii. Press Auto on

Question about Toshiba Office Equipment & Supplies

3 Answers

a new lamp. lamp faliure not warming up fast enough sorry lamps exxxxxpensive red light indicates lamp is expired. even though you get temporary light, the lamp is shot. Try BULBMAN.COM for a new lamp

Not finding what you are looking for?
LG LP XG2 Multimedia Projector Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top LG Office Equipment & Supplies Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66830 Answers

bvmihai

Level 2 Expert

177 Answers

Aron

Level 3 Expert

2586 Answers

Are you a LG Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...