Nordic Track NordicTrack COMMERCIAL 1750 Treadmill "fan move" Questions

move. Ive only had it for about 2 years. It was working fine before I moved it across a few states. When I unpacked it and turned it on the lights and fan and sounds all came on but the belt wont turn

cx 1055 fan stays on and can not control the resistance even with unit unplugged its hard to move You-Tube video "C--bmDISgrA" placeholder (do not delete)

...the fan, the height adjustment etc. except the actual belt won't move unless I manually push it... please advise me how to fix it. please see the video and lube inmediately. God bless ...

...on Moved treadmill to a new room. Console power stays on for a second, then turns off (including fan). Comes back on after second or two, then cycle off again. Checked power to treadmill and it ...

...move, its so big I cant get it through the door I need to know how to take it apart to do so. I dont have a book and its the 900?? its heavy, large and fan TV hook up? I need to bring it in from the ...

... it stops moving That's an embarrasing admission. A treadmill works like a conveyor belt or a car's fan belt. If it is too loose it will slip under load. There will be an ajuster on your treadmill. ...

...and had the movers take the console off in order to get it out of the house. Now the treadmile fan runs constantly and won't turn off. the screen doesn't work If you wish to get some details; ...

...move. I did the calibration on it and it went all the way up and back down, no problems there. Fan works, speed and incline works, pulse works, programs work user 1 and 2 works. I looked at both ...

...I have checked the wall outlet and that is OK. Took cover off and see that a DS3 led is lite. The fan is running. Any ideas? Remove the the black and red wire from the Motor control board, get a ...

...move the machine to the bottom using this procedure. Remove the hood cover b removing 2 screws in the rear of the machine and removing the first 2 screws on the foot rails on each side. You can now ...