Nordic Track NordicTrack COMMERCIAL 1750 Treadmill "console" Questions

T3 Treadmill Stuck Key When starting our lifetime fitness t3 advanced console treadmill it gives a stuck key error of column 5 0010. Not sure how to fix this issue. We have tried unplugging and ...

console to elevate and control speed does not work you will need to test the red wire coming to the console with a volt meter to see if you are getting the required 9-12 vdc if you are replace the ...

...to repair or who would call out - Derbyshire area? Thanks If the light are on and when pushing the console start button the oval track lights (on the console) should move. If not, then your console ...

...see if the Pro-Form device is properly plugged into a working, grounded power supply if none of the console buttons are working. Turn the device on and reset local fuses or circuit breakers if ...

...between mph and km, then follow these instructions. The setting is changed by a switch on the console circuit board. Unplug the power cable. You will need a medium philips screwdriver. The ...

The numbers on the digital console are no visible The numbers on the digital console are no longer visible. When you start the treadmill, the numbers are not fully lit. You can't read the console. The

...suposed to be illuminated? And if so what mey be the problem? ambeant lighting(room light) lites console, no back light in console. move item under room light or obtain floor lamp to see console ...

...is recieving power can it still be bad and if so can it be fixed without buying a new one? If the console lights up but the buttons don't work, then unfortunately it's probably the console and ...

...on, not even with batteries. How do I fix this? seems like the voltage was to high and took out the console. a replacement console is needed I had a customer do this, the console is no good. You need ...

Nordic Track Treadmill will not run We have a Nordic Track EXP 1000 treadmill the console works but the track will not move. There is a light on the console for manual, but we can not change anything ...