...STANDBY] button. On the remote controller, press the [RECEIVER] button, followed by the [ON/STANDBY] button. The AV receiver comes on, the display lights up, and the STANDBY indicator goes off. To ...
...standby button for couple of time and it turned on and remained on. Last week, it had gone into standby mode again as earlier. However, this time when I tried to turn it back on, it would not stay on ...
Question about Harman Kardon Audio Players & Recorders
...Standby Button not working Just wondering if anyone has encountered the standby button not working. The main power button turns the lights on, but since the standby button doesn't work it won't let ...
...standby button keeps flashing and I cannot find out how to get out of the standby mode. Try this: On the top of your remote near the power buttons there are a series of buttons that have names under ...
...STANDBY/ON button, The receiver will shut off before the AMP ERR comes up. Then hold the TONE +STANDBY/ON button until the screen says reset. then press the TONE button, the screen will ask you to ...
standby button stuck Onkyo TX SR601 - standby/on button stuck in standby position - can't turn machine on Hello. Check all of the buttons on your unit to make sure that they are not stuck...you can ...
STANDBY/ON] button. "Clear" might appears on the display and your receiver might enter Standby mode. Hope it does.. With your receiver in the Standby mode, hold on STRAIGHT (EFFECT) on the front panel
standby button, the receiver most likely has a problem with standby power supply or mcu. If you get flashing red standby light, there is a problem with one of the channels or main power supply. Either
...standby button comes on solid. When I push the on/standby button the orange ring goes to green and blinks slowly and the display comes on like everything is ok, then the display cuts out and the ring ...
34 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions