Onkyo TX-DS575 Receiver "tv volume going itself" Questions

...TV sound system. Any suggestions as to what the heck is going on? First, NEVER turn the volume all the way up to see what's wrong. If HALF volume doesn't work you're only risking a catastrophic ...

...tv or other programs also when you turn the sound down the volume numbers go up. Mine used to work but I recently moved and think I connected everything the same way, but I'm having the same problem ...

...volume up' command. Then look around for other remotes being used, wireless devices, use your imagination. I used to have a remote-controlled space heater and my TV would sometimes shut off if I used ...

...TV Hooked to surround sound, two front speakers, 4 wall speakers, 1 sub woofer. Restart unit and reduce volume unit is OK but normal talking is too low. Hello Jerry, This means that the unit is going ...

...volume and obtain the best output. The one that worked for me was digital in and DTS function. I used video one as the source that well not matter any source or all sources should work but try to go ...

...TV remote code for yamaha rx-v463? anyone? It is 30376. The trick to discovering, is to turn the receiver off, first. Then it will power on when you input mute/select 30376. Then you can program the ...

...volume to listen to TV audio (select unused input and remember it is for TV) the key is to remember that cable box will drive the initial vol so raise or lower cable vol then use AMP vol to obtain ...

...TV) once a certain volume level is reached the unit goes into "protection" mode and shuts itself down. Due to a change in address I recently had to move & re-connect the unit for the first time, but ...

TV/movies, I shut it off as normal and then the next day, we start the process all over again. I've checked all external cables to make sure nothing is shorting out. Everything looks good. Again, it's

volume, and there is no sound coming out. Get the original Yamaha remote, go to Set menu, manual setup, speaker setup, and look for "extra speaker." it needs to be set to "zone 2." This is off the top