Onkyo TX-DS484 Receiver "manually change 5" Questions

change theaters and such to get all 5 speakers working with the sub, I can only get either the center speaker with the sub, or just the front left and right speakers with the sub to work. When I run a

...5 of my speakers to work with no remote??? Just trying to setup my surround sound. I have the manual but no remote. The manual says to select "reciever" then press the "@" or "#" button to select the ...

change inside? TIA -George in OR Onkyo.com has the owners manual in full. Got it! I downloaded the TX-SV515PRO manual and on the last page was close enough to the right direction. What I did was this:

...change frequencies quickly, hold down TUNING -/+ buttons and release when you reach the frequency you desire. Hope this is the procedure you want. Just post back if you need more help. Welcome to ...

...change the speaker impedance to 6 ohms: 1) Set the unit to Standby. 2) Press the Power Switch on the front panel while pressing the STRAIGHT button at the same time. Release the keys when ADVANCED ...

...5 speakers. Any ideas? Thanks all! I just read over the problem you were having with your Onkyo TX-SR500 receiver. It sound like the unit needs to be setup for all five channels.Sence your symptom ...

...5 years. Recently my Dad was playing around with the settings. I didn't notice any change in sound, however, when I watch TV or listen to the stereo for a couple of hours, the display will suddenly ...

...5 fuses that I could find are fine. I have disconnected and reconnected every board, connector and the one IC that seemed plugged in, in case oxide had built up. I have the owner's manual but no ...

Receiver says center channel unavailable When I first bought it, the center channel worked. I now want to connect just my Vizio TV input via digital optical line, then out to 5 speakers. The side ...

How to change time See the instructions on page 5 of this manual.