Onkyo TX-DS595 Receiver "problems relay" Questions

I have a Pioneer VSX-4800 receiver. My problem is that one of my relays is bad. I have replaced the power relay in it only to find out it was the other relay was bad. The problem I am having is ...

RX-V995 Won't Start - Found Possible Fix But Need Parts I have the same problem as others - a 9 year old RX-V995 receiver that would not stay on, and now will not turn on at all. The problem started ...

Hi, Rx-v559 power button doesnt power up amp. +5v stb is active... whats the most likely problem? If the power relay clicks. It may need the main power transformer. Primary of the transformer should ...

Pioneer Model VSX-D901S, No Sound Original problem was no display on its front. Made a jumper the power magnetic relay solves the NO DISPLAY problem. Has a display now, but does the unit no sound at ...

Kef PSW2010 Subwoofer common problem DIY repair My Kef PSW 2010 Sub Woofer is suffering from the common relay trill noise problem that happens when it is left running on standby mode. I am an ...

Speakers Cutting Out Hi. I have had my STRDB930 for a few years. The rear speaker relay started cutting in and out, making a rapid clicking sound every so often. Sometimes the rear speakers would be ...

Onkyo TX-V940 Has no volume at switch on, After pressing function buttons volume comes on. Left & Right channels cut out intermittently.Dave Hi, Did you check that all the connections are fine and ...

No Sound from Receiver My receiver stopped producing sound from any source, so after check that the mute button wasn't engaged, I took off the top and noticed the relay switch made a popping sound ...

there is no sound coming out power comes on but no sound come out I had a very similar problem with my Sansui G5700. Powers on, but no sound. My solution may not fix your problem, but this is what I ...

Clicking Problem with a Receiver Sony STR-DE897 I saw the other post but I've isolated my problem down to a specific part / Relay and I need to replace either the Speaker PWB or the relay itself. I ...