Onkyo TX-SR601 Receiver "display panel light" Questions

...see the display. It may just need a new display bulb, that back lights the display. I presume you might have set the dimmer for the Front LED Display panel too low and hence you can't see any

...display on front panel flashes.no other display comes on the unit or the monitor.ps3,DVD,sat all function when directly connected to TV.No output or display but green light on standby button flashes ...

...Any suggestions? Hi ripper The unit has a built in display dimmer, with a button to control the level of brightness from the display both on the remote, and the front panel.Try this regards ...

...panel lights will not work on my receiver. All other functions work. The unit is about a year old. One day they came on mysteriously, then the next day they did not work again. Any help will be ...

...display panel, or the power activator on the remote. All that happens is that the standby light continuously blinks. I goes off for a half second when the remote power on/off button is pushed or the ...

...panel display is off! 1. Check the DIMMER mode by pusing the buttom on the front panel -- it may be set to OFF. 2. Push the PURE DIRECT button on the front panel (or remote control) -- it may be ON, ...

...panel display; heat related issue. A common fault that develops is component failure, specifically, R9304, a 10 ohms dropping resistor connected inline with the +44V display supply. Should you be ...

...that hasn't looked at the manual or the front panel. Page 10 "PANEL DIM (button) The front panel lights have four levels: bright, medium, low and off (low intensity display with amber LEDs

...panel lights nor does the lcd display does not function however the power light does work! The unit otherwise functions. If one turns up the volume one can stumble through the tuning and find the ...

...panel lights on my Marantz 2270 receiver? I've taken the face plate off and the plastic outer cover to the dial and meter display. Still see no way to get to the lights and change them! Thanks, John ...