Onkyo TX-NR801 Receiver "channel not working" Questions

...channel speaker is working. Please advise. Recommend changing your FINAL drive AMP IC most house BOTH right and left channels, your drivers right channel input is good cuz it is used to make the left ...

...Channel not working on pioneer vsx-d608 i have an old pioneer vxs-d608 receiver. was working fine, but now i discover the center channel is not outputting sound. the screen has all five channels lit ...

...working when audio is set to 5/6 Channel stereo. I would apprecaite if somebody can give me idea how to fix this problem. Thanks you.. Make sure the input setting is set to 'Auto' while on those ...

...channel speakers not working on this unit - every other channel works (center, rear and B channel) . All connection have been checked. The problem is the jumpers in preout front amp in, is where you ...

...channel not working on yamaha rx v793 receiver all speakers, cables and connectors are in good condition but balance knob to right position not working If the channel is dead on headphones suspect a ...

...working. Can you advise The left channel output in the amplifier stage is going out - could be a cold solder connection due to overheating. Check the left channel output of the power transistors ...

channel isn't working. I have switched the two front speakers and the right speaker works on the left channel so it is not a problem with the speakers or wires. When I turn the volume up loud enough,

...channel not working on my Technics reciever? All speakers are hooked up and on, left channel works and right doesn't. Checked and double checked connections, switch balance all the way to the ...

...CHANNEL NOT WORKING The Right front speaker is low in volume. All the other speakers seems to work properly. Please help Adding on again: I have interchanged speakers, if i connect any speaker on the ...

The left channel works correctly on both A and B. The right channel does not work on A or B. It's not a source problem as it does it with all sources. Tape monitor is not on. You can very faintly hear