Citizen Largo Eco-Drive BL5144-51E Wrist Watch "battery place" Questions

...using the screwdriver to pry up in a couple of places. The battery is held in place with a "C" clamp which you can bend back with your fingers to pop out the old battery. Then reverse the

...battery will be held in place by some type of retention device. It will need to be removed. Some clips will be removed by using tweezers. Some clips may be moved using a screw driver, and some simply ...

...Place the battery compartment cover back onto the backside of the watch. Insert the quarter back into the coin slot and turn the coin clockwise to the "Close" position marked on the back of the case. ...

...battery is facing up. 5. Press the holding clip back into place. Handle the clip with tweezers only, since it is very thin and can be bent or lost easily. Once it is in place, press the back of the ...

battery: Place the new battery in the watch, making sure that the positive and negative terminals are properly aligned. Close the back of the watch: Once the new battery is in place, close the back of

...spot with the batter in. The gold one goes in the tiny hole near the "view" spot, and the silver spring goes year the 'cage' that holds the battery in place accross from the gold spring. Good

...battery will be held in place by some type of retention device. It will need to be removed. Some clips will be removed by using tweezers. Some clips may be moved using a screw driver, and some simply ...

battery in place you can either push this over to allow the battery out or undo the small screw that holds this bracket in place this will then allow the battery to fall out, If their are no screws in

...battery replacement place the back of watch back in place. If it still doesnt work, I would say it is the wrong battery. There are so many different types of batteries, you need to make sure you have ...