quicksilver throttle assembly tilt and trim button will not work on the up position, down works great, jumped at solenoid and up position works. what could be wrong could it be the switch yes the ...
sonar does not appear to work - not picking up depths or bottom structure. All other functions look good. This problem is most likely linked with your transducer. 1. Check your transducer cable and ...
My sounder works very eratic. Sometimes it works and sometimes not. Most of the time it is just flashing 0.0ft. The speed and temp both work fine. What version software are you running in your 498? ...
...and will fax or emial you a manual for the motor. good luck. I have 12/24 V Minkota. It had been working great and all of a sudden it will not work on 24v and works fine on the 12v. Should it work ...
Charts not working I have a Raymarine E120 and had some error occurred and my Caribbean chart stopped working. My Iberia charts from the Med still worked so I thought it was the chart. I ordered a new
...on the run button it will work. When I return it to the water their is a 50% chance it will stop working. I made sure the battery were fully charged and clead wire contacts I could get at. Some ...
Question about Boating
300 course computer. It goes to 238 or 283 and won't follow boat around and usually after it starts working or sometimes it will start working rite away Well on the working part it's prob a power cord
MINN KOTA MAXXUM TROLLING MOTOR WON'T WORK PROPERLY WHEN I PRESS MY FOOT ON THE BUTTON TO ENGAGE THE MOTOR IT WILL WORK FINE THE FIRST TIME. THE SECOND TIME I GO TO PRESS THE BUTTON NOTHING HAPPENS. I
furuno 1850 has water in unit, only noticed furuno 1850 has water in unit from rain, only noticed because couldnt get chart to work and looked in card slot. finder works plotter works but no chart. ...
Ray Marine ST 40 Bi Data System Depth not working out of water. The depth is showing dashes on the screen out of the water. It has not been in the water yet. The directions say that dashes means ...
45 questions posted
Usually answered in minutes!
14 Questions
