...stitches. Raise the needle. 7. a) Set the stitch width knob at 2. b) Sew the second side and stop just short of the length of the first. Raise the needle. 8. a) Set the stitch width knob at 4. b) ...
...stops after 2-3 stitches I have a Necchi 3537 sewing machine. When I press on the foot pedal it will stitch 2-3 stitches and then stop. Each time I press on the foot pedal I get the same response. I ...
Elna SU buttonhole- I can't remember the order to set the dials for the automatic button hole function. Anyone know? Thanks sure, put on the buttonhole foot after putting a button into it and using ...
Question about Sewing Machines
...2. The needle is damaged replace with new needle 3. The wrong size needle is being used Choose a needle to suit the thread & fabric 4. The foot not attached correctly Check & attach correctly ...
...stops, for safety reasons,it says sewing backwards is primarily to lock the threads at the start of a sewing process ans so stop unraveling of the stitch it should be about 1/2 " long so you start ...
Question about Sewing Machines
...2 stitches before stopping, when I take my foot off the pedal then press again it will re start. What could it be ? Thanks Mine did that very same thing. There is a sensor in the foot pedal that was ...
...stitches; stop the machine at the top of the O. -Then turn the dial to 2 and the top edge of the O will sew; stop the machine after half a dozen stitches. -Turn the dial to 3 and the right edge will ...
...stitches regardless of whether I turn the stitch guide to "normal," "zigzag," or "overcast" mode. Have you also turned the stitch width lever to 3 or 4 to form a swing ...
do a couple back stitches. That's one way. Another older way is to sew 2 or tree straight stitch lines around the center line. Remove then use a hand rendered button hole stitch after you cut the hole
224 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions
