Fargo DTC525 ID Card Printer "open" Questions

Error / Ribbon Jam/Broken When open the upper cover and closed it back it make a strange noise and the error message ERROR/ RIBBON JAM/BROKEN. When you open and close the lid on this printer, it tries

...O" Ring rubber attached to the printhead and that solved the problem. No more head lift errors. try opening the top portion of the printer then push it down again. the sensor might be detecting that ...

...in printer The printed card did not eject. Stuck in the printer and became very soft and pliable - Open the lid. -Lift the print head. -remove the ribbon. Now, on screen you will have the options to ...

...all including the one that is underneath the turn table. You can spin the rollers when the top is open by pushing the arrows on the display. Also be careful not to hit your printhead in the

Feeders rolling backwards I just started using this printer.. I printed up three or four cards then I noticed that the cards weren't feeding at all. When I opened up the hopper door, to make sure ...

...printhead is going down before OR after the card has passed through. You would know this when you open your cover, and unlock you printhead, is the break before or after the card? Try printing the ...

...will determine the direction that the Card Feed Roller on the Flipper Table will rotate.) 2. Open the Top Cover and remove any cards that are jammed inside the Printer. 3. Reset power on the ...

error kard jam With the Printer powered on: 1. Open the Lid 2. Raise the Print head 3. Remove Ribbon. The printer's controls will now allow you to move the rollers back and forth. Look into the ...

...Hope this helps you. Good Luck! Hello dear, it's your perfect solution for you, just open the link and download your required