Magic Chef MCD1611ST Microwave Oven "ovens shut down overheated" Questions

...shut it down until it cools down. There may also be a loose connection in one of the switches or a cold solder joint in the low voltage power supply. I would suggest to check and make sure that the ...

...shut down after becoming overheated. It has done this in the past, but always would reset after a few hours. A day after it shut down it is still dead. Do you have any suggestions? Remove the top ...

...Hi Beverly. go to this link and have a read up about it. My microwave oven seems to overheat and shut down sometimes Why Samsung... or find more info at this link. microwave overheating Google ...

...shut down and just stop working try to checked the fuse if its blown.and replace a new one,check also the power cord. Mine is doing the same. GE site says microwave may be overheating due to blocked ...

...shut down automatically when it sensed nothing was in it. The magnetron thermal protector probably shut the oven down. Magnetrons don't like it when their load impedance is too low (empty oven or ...

ge profile jes2251sj02 shuts off after 10-15 seconds If it's heating and shuts down, the thermal fuse may be defective, monitors the temperature of the magnetron, or the magnetron is overheating.

magic chief mcd1611w powers up then shuts self down? It depends on how long it runs and the oven status (idle or dead?) when it shuts down. It may be that the internal cooling fan is not running or is

microwave shuts down after cooking three or four minutes I recently purchased and installed the MMV1153BAW microwave. After cooking for about four minutes, it shuts down completely. It has never ...

Why does it get to hot and shuts down before end of timer and no ding, food stays cold Check if the cooling fan is operating. If it is, either the thermal switch is bad (unlikely) or the magnetron is ...

I have a panasonic microwave oven. It shuts off after running for just a few seconds. It does not flip any circuits. The model # is NN T785SF. It thinks its overheating, and the (faulty) thermal ...