...change problems I have never changed a ribbon on our new Fargo C30. I have the ctg. which reads: Fargo DTC400 part number 044230 When I place a new ribbon inside the right hand button on the top ...
Question about Fargo Persona Office Equipment & Supplies
...There is "ribbon Problem" and "card Jammed problem". We have tried to clean the printer and even changed the cartridge ribbon but no good news. How many prints have been down on the unit? the most ...
...ribbon and cleaning the print head. If cleaning did not work, the print head would need to be replaced. This is a simple replacement for people that are some what technical. However, it is a costly ...
The pause light on the Persona C30e printer keeps flashing and will not print. I am having the same problem. Hopefully changing the ribbon will resolve this. I am going to try it.
Question about Datacard Group Office Equipment & Supplies
...change the ribbon type settings. Finally, return to the card creation program to send the card data to print. * If the ribbon was repaired, the wrong take-up spool was used. Repair the ribbon again, ...
Question about Printronix Office Equipment & Supplies
...change the ribbon cartridge with working cartridge ribbon from another printer of same model but printer given same error. cartridge which is in this printer is working in another printer. what i ...
Change edge to edge settings. ?You might have moved the print ribbon while the printer power was off. The next card will print correctly. The printer is designed to allow you to fix problems while the
...out party used ribbons and re insert them later. The paper and the ribbon are matched. I dont think that you can just change the ribbon. You may have to change both the paper roll and the ink
...and the check ribbon label light comes on. The thing that gets me is it started happening when I changed out the labels...any help you can give me is greatly appreciated. Calibrate the printer
showing Ribbon Fault hiclean the ribbon then if still same error chang the ribbon first replace ribbon then clean ribbon sensor at left side if not check cable to motor of ribbon works properly
4 questions posted
Usually answered in minutes!
37 Questions
24 Questions
13 Questions
10 Questions
9 Questions