Kaito KA1101 AM/FM/SW Radio "set stations" Questions

...set the stations on the memory. Otherwise the raido works fine. OK HERE'S WHAT YOU DO 1. USING THE UP AND DOWN TUNING, TUNE IN THE STATION 2. PRESS THE MEM SWITCH (LEFT SIDE OF ROUND SWITCH) 3. PRESS ...

...stations may be independently set. After programming the buttons, pressing 1, 2, 3, 4 or 5 will instantly change the frequency to the preset station. 1. Turn power on. 2. Set the radio to desired ...

...set Stations I am trying to figure out how to set the stations for memory u set up the channel u want with "tun.up"\"tun.dn" press the "mem.ch" for five sec untill it flickers or beeps now u know its ...

...set the clock & preset the stations. I bought the radio 5/4 /11 & there was no brochures or warrantee in box. Setting the Clock 1. Press and hold the CLOCK button until the hour begins to ...

how to set buttons for memory How to set memory buttons To set memory buttons: 1) Tune to the station you want. 2) press "mem" button. 3) press the memory button you want to use for that station (1 ...

did not recieved operators manual with dewalt dc011 construction radio. need to know how to set the select channels. 1-2-3-4 1. Select the Radio Station you want to save. 2. Press and hold the Memory ...

set stations? This is how to preset stations on a P2257 Koss: Tune to desired station. Press and hold in the Memory button for a few seconds, then release (the Memory readout should be flashing on the

...station you want, hold the button you want to be that station down for about 3seconds and it will set

...purchased a dewalt radio/charger through sears, was a close out where had no instruction for presetting channels 1-2-3-4 Not able to set, need instructions. 1. Select the Radio Station you want