...wont turn on and its a bit smelly It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously ...
overheating Belt Okay I pulled apart the vacuum, the belt seems fine and so does the brush, but this little metal piece that the belt wraps around seems to be getting supper hot. The brush wont spin??
...wont turn back on until about an hour later. Then i'll start it up again and it'll go off after vacuuming for about 5 minutes. What do i do It's overheating. Empty the cup and replace ...
...wont turn on. the motor probably overheated. take it to a vacuum cleaner dealer and see if they can fix it. There is a reset button located in back near left wheel, it is white. Use a safty pen or ...
...out vacuum very well but still wont start any suggestions? i hope you didnt kill the motor by ...
...wont turn on cleaned the filters see no blockage wont poweron Hi there, it's Jack at Dyson. If your DC28 won't turn on at all, we would need to take some additional details to confirm if it's ...
...overheating I have changed the bag and filter even though there was no indication this was needed now it wont turn back on Have you removed the bottom of the vac to be sure there is no obstructions? ...
wont turn on go to this link below then scroll down to bottom of page for troubleshootinghttp://rainbowsystem.com/uploads/manuals/Rainbow_eSERIES_English.pdf If your unit is overheating, there must be
...wont cont to vaccume. can we clean/rinse the filter out. filter light has come on and then turns off once the vac shuts down.. thanks Using a vacuum cleaner for wet cat litter??? Not a good idea at ...
...wont turn on cleaned brush bar Hi Mike, it's Jack at Dyson. If your DC07 shut off while you were using it, and now will not turn on again, it may have overheated. Most Dyson vacuums are equipped with ...
73 questions posted
Usually answered in minutes!
151 Questions
65 Questions
59 Questions
44 Questions
