Motorola CP185 (16 Channels) Two Way Radio "sound" Questions

No sound on cb radio I have a TRC 446. I get no sound from the radio while in the cb mode. When I turn it to the weather channels I have sound. I have no idea what happend.It was working fine until ...

The speaker sounds tinny and has lack of volume Sounds like the speaker got wet. If there is an earphone socket, does that sound OK ? If so, the speaker is your problem and must be changed out.

...HEARD LOUD "POP" FROM A SPEAKER ,IMMEDIATELY NOTHING HEARD , TRIED THE HEADPHONE STILL NO SOUND NOT EVEN A HISSING SOUND , TX STILL OK If you are still seeing meter deflection in received ...

Only one walkie talkie produces sound Bell Sonecor model BE-1438SP. Display on unit 2 shows that unit is receiving signal but no sound comes out. Unit 1 can receive sound and call alarm but when you ...

...ways VHF RAdio My radio receives very well on the pre-programmed 40 CH but in Tx it make a tic-tic sound at regular intervals (repeiting sound) on all the channel and when I press the button on the ...

Martian sounding I do not have the manual for my walkie-talkies and when I first got them they sounded great. I recharged them and the batteries are fine, but now when someone talks you can't ...

Motorola gp300 low battery warning sounds too soon. I have two radios so i switched the batteries. The suspect radio still sounds the low warning while the other radio will go for another few hours of

...turns on normally but when I trie to press the talk button it looks like it will work but makes a sound like when a phone signal fades. The other one does not display anything when I turn it on. ...

i have many base Radio CM360 have problem in sound no sound but have power i checked in speaker it is good but i need the layout for this model because i have 50 radio have the same model and always ...

...fault finding amp was creating a constant loud buzzing,i replaced a discoloured pre amp valve,sound was then recovered,however an intermittent crackling sound has occurred and switches on top ...