Quasar VHQ400 VHS VCR "cassette jammed" Questions

cassette jammed when inserted. I removed the top of the unit. How to Remove the jammed tape is not obvious. I don't want to remove or dissasemble more than necessary. Anyone have experience removing a

panasonic nv-j30 jammed cassette I already took off the top cover but I cannot find the mechanism to eject the cassette manually. The tape is already inside the cassette. Toss it out ...its broken

...took off the front panel. It is not from the cassette already jammed, though. Any help would be appreciated. Simply remove the tape, broken pieces, clean vcr with alcohol. don't use the tape ...

cassette jammed-how to get it out you must open the VCR and remove the Cassette manualy

Mitsubishi U51 vcr cassette will not come out Mitsubishi U51 vcr, cassette will not come out. I opend the unit and found a belt that was not attached to any part. THE BELT COULD OFF COME OFF THE ...

...cassette jammed, how do i get it out please? Remove the case, remove the mechanism cover, cut the mangled tape in pieces and take it out gently - you are going to have to rotate some part to untangle ...

...jammed so I ejected the cassette. The cassette came out but the tape was unraveled back into the machine. I tried another tape with the same result. Any suggestions would be welcomed. l would ...

reset vo-9850 When I try and load a cassette it goes in a couple of inches pauses and then ejects. It does not drop down. This is usually caused by frayed wires in the cassette carriage. There is a ...

Anyone know how to translate error messages? Thanks [email protected] [email protected] Error 20 is "Cassette compartment motor lock" this is meaning the cassette loading mech is not accepting the tape

...cassette, make sure the motor connection is removed from the circuit so as not to damage the loading IC. 3. Some cases the capstan also is the loading motor and you can manually turn to release. 4. ...