Kyocera Mita FS-C5016N Printer "ricoh printing 1 copy" Questions

ricoh 3245c paper jamming in fuser any help please prints 1 copy then jams also double faint on top of print Check to see if;1. the exit sensor in working properly2. There is a piece of paper stuck ...

...Ricoh Aficio 2020 D; occasionally prints 8 1/2" X 11" fax as if sender laid on copy plate sideways. Upon contacting sender, not possible -- their fax machine is feed only, so it could't be sent ...

Ricoh Aficio 250 When connected to a computer with windows 2000, I can not get it to print from the computer to copier and using LPT-1. It was working and now it shows error and when retry it still ...

Ricoh Cl2000n is mass printing pages when we only tell it to print one page. It has done this from multiple computers, so this leads me to think that it IS the printer and not the computer, any ideas?

...ricoh aficio Fusing overheat error (center) 2 Symptom: The fusing temperature is over 250°C for 1 second (detected by the fusing temperature monitor circuit). Possible Cause: • Fusing thermistor ...

...Ricoh FT 4215 copier (laying unused for 1 year) Printed 40 copies or so and output mainly black with horizontal and vertical streaks. Reduced to lightest copy setting and white appears gray and still ...

ricoh aficio 3025 copies out of alignment whether you load the item to be copied from the top feeder or the copying surface, copies are cut off at top. Is there a way to reset this. Check the paper ...

...Ricoh Aficio 1018d copier but its not copying properly, half the words are missing its ghosting out towards the edge of the paper. It happens when using the feeder or placing it on the glass. Can ...

...1/2 inch´s, why do this? is there any sensors on the adf unit, if so is the paper being feed into the adf unit, there might be a bad/defective sensor, try placing a letter size sheet on the ...

It will only print one page at a time. How do I get it to allow me to set the # of copys. USER TOOLS SYSTEM SETTING CHANGE NUMBER OF COPIES FROM 1