Question about Office Equipment & Supplies
...bad again when people print after a break. I'm guessing it might be a photoconductor unit problem even though it is only halfway through it's life, but I was wondering if anyone had the same problem ...
Question about Epson Office Equipment & Supplies
print even when printing no content. The photoconductor unit is fine according to the printer driver and the K cartridge looks fine, too, visually. Do you have any idea what may cause this? Thanks! If
...noise coming from right side of printer. Having trouble copying and printing Could be photoconductor gears are bad will have to replace unit or fuser unit you will have to decide which one ...
...Estudio 311C that bleeds red all over the pages. Seems to do it only when I am printing with color, not black only. Sounds like your color Photoconductor unit's cleaning blade is dirty/bad/worn
Question about Ricoh Office Equipment & Supplies
...bad cleaning blade or improper charging of the drum unit. Ghost images appear on the next printed page if cleaning blade does not clean the drum surface. Drum/ photoconductor is very sensitive to ...
Question about Xerox Office Equipment & Supplies
...but it sounds like you've probably got a bad drim or drum blade, which, I think, comes as a whole PCU or photoconductor unit.There's other things such as fuser rollers, could be dirty laser,
photoconductor unit have wrong cleaning cycle due to the defective cleaning clutch. This problem could be a couple of things. It sounds as though you may have a bad pcu drive clutch or your drive case
Question about Kyocera Mita Office Equipment & Supplies
...print without the matter printed not photocopying the matter Sounds like a bad photoconductor unit (PCU), or problem with the transfer roller which is mouned inside the right side door. The PCU ...
photoconductor module on an ecosys the module should last 100,000 pages nothing ever seems to last that long send an email to http://www.pcandl.com/ or call where you bought it Clean the LED array for
...Print quality is now A++. I THINK that the photoconductor is actually only the blue/green cylinder on the underside, the black belt that this problem pertains to is a transfer belt so the paper need ...
49 questions posted
Usually answered in minutes!
180 Questions
128 Questions
77 Questions
66 Questions
63 Questions