...paper jams may occur and the printing will be out of position on the page. Open the back output tray. Use both hands to slowly pull the jammed paper out of the fuser unit. Close the back output tray. ...
Question about Oki Printing Solutions Office Equipment & Supplies
duplex paper jam error 371 each time i try to print . how do imake the error go. i dont use the duplex at all. See page 75 of the attached user manual on how to remove a duplex paper jam. If you can't
Question about Canon Office Equipment & Supplies
...paper jams underneath. Single page prints are fine, but when just sending anything to print, without even duplexing, the printer makes a real squealing noise like it needs oil. Not sure if this is ...
Question about Canon Office Equipment & Supplies
...paper remain inside the product, more jams are likely to occur. Figure 4: Remove scraps of paper If you do not see jammed paper in the rear access area, push the buttons on the latch on the rear of ...
Question about Canon Office Equipment & Supplies
...paper going back in jams and it tells me i have a rear/ duplex jam when in reality it is not pulling it in straight. this is very frustrating as i have alot of papers to print. any help is greatly ...
...paper jams, when the first printed page moves back into the printer for the second side to be printed on it. The paper moves only about 3/4ths back into the printer and then the transport wheels or ...
...paper jams or poor print quality. If there is a paper jam, see Paper jams in the User?s Guide. If you have a print quality problem, see Improving the print quality in the User?s Guide. Manual duplex ...
Question about Canon Office Equipment & Supplies
...paper jams when reloading for two sided copies. once the 1st side is printed the paper is released, recaptured and starts to feed back into the prt. 1/3 into the feed it jams, paper is slightly bent ...
Question about Canon Office Equipment & Supplies
...Paper stock has not varied. Thank you for any assistance you can provide. Maybe this would help: Open the access door on the duplexer and clean the rollers with a damp cloth. If that solves the ...
...using cardstock or other "special" paper, the printer won't duplex it because the paper is too thick. Make sure the paper type settings are set for plain paper. When you go to print, does the print ...
132 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions