Fellowes Powershred PS-60 Shredder "paper slow" Questions

...slow job - Unplug from mains Remove each piece of paper as close to the jaws of the shredder as possible. Then hopefully when plug in and turn on will not find too much resistance and be able to cope ...

cause of "stall" during routine shredding letter head paper Lack of grease on the internal gears. accumulation of small bits of paper causing the motor to slow down and stop.

...the paper real slow. What do you think the problem is and can I fix it myself. Thank you Try putting some shredder oil in the throat of the machine were the paper goes to see if it loosens things

...has suddenly become much noisier, you can hear the cutting system slowing down after cutting paper. The 280 is notorious for buildup of paper in the cutting cylinders and strippers. If you are ...

...Paper Shredder PS-045/B stops working after a while. The shredder will work fine for a while, then slow, then stop. After a while (a long while) of being off, it will work again. I think it may be an ...

...my Fellowes S701CM Shredder is permanently damaged. It is much louder than usual when shredding paper, and when feeding in the second set of paper sheets (3 at a time), the motor slows and stops ...

I was shredding 3 papers at a time and the shredder seemed like it was running out of gas and dying. The red overload button came on. I checked the basket and it was not full at all. The motor seemed ...

slow when 3 pieces of paper were entered, before it would eat through 5-6 pieces of paper with no problem at all. you could even put Credits cards through and it eat them them with no problem (rebates

...is a light weight oil ) and pour some of the oil onto the cutting shafts/teeth where you insert the paper...then once in a while it does not hurt to fed a sheet of paper thro that you have put some ...

...and they should be able to help you how do you oil the Identity Guard Model SH1524CP? The blades are moving very slow and does not always work when the paper is inserted. I have tried cleaning the ...