Radio Shack Pro-95 Handheld Scanner "scan channels" Questions

...scan memory channels, press SCAN. To hold a channel, press MANUAL. ? The 50 channels are divided into 5 banks (Bank 1: Channels 1-10, Bank 2: 11-20, etc.). ? Any of the 5 banks can be turned off from ...

...one of the number buttons to 'open-up' or turn on a bank of channels to scan (IF you already have channels progammed in Bank #1, then press 1 while scanning and those channels in that bank will

...scan 20 channels and all of a sudden, one of them has begun to receive static, hash, hum, etc. to the point that the it breaks squelch causing the scanner to stop on the channel every time. The ...

...channels 1 thru 9 must have a zero before them, example 01, 02,........ 09 If you want to add more frequencies at this time, got to step 2. To lock out a channel, press "SCAN" and while the unit is ...

I have a Regency Touch K 100 ( NO MANUEL ) Scanner 20 Channel SI & S2 To enter the FREQ 1 PUSH MANUEL 2 Enter FREQ 3 PRESS ENTER 4 Press Channel Number That all works, but does the Unit ...

...scan the channels using SVC. It will go to one channel and dtay there. Pressing hold and the the up arrow key it will scan untill the up arrow key is released, then stays on that channel. How do you ...

...channels, press [SCAN]. Your scanner scans through all the channels except the ones you have locked out. Be sure to read the following sections to get the full benefit from your scanner's special ...

...one of the banks scanning, so press 1, 2, 3,....9, 0 whatever bank you have channels programmed in order to automatically scan. You should be able to press "Manual" to see each channel

...scan its channels, press the letter that corresponds to the bank. The bank's letter disappears from the display. To unlock locked-out banks, simply press that bank's letter again. The bank's letter ...