Question about Hitachi Office Equipment & Supplies
lamp Change lamp & clean filter instruction came up Changed lamp &cleaned filter but did not reset-no manual Pressed reset could not get rid of screen. Power & lamp light flashing Now switch power on
change the lamp. How do you get back to the counter 0. Found in the owners manual. It's important to reset the Lamp timer after replacing the lamp since the Lamp timer will trigger the warning message
Question about InFocus Office Equipment & Supplies
Change Lamp. Is this something I can do myself? Change Lamp. Is this something I can do myself? yes. remove the lamp door and the lamp, replace with a good lamp (the exact type), replace the door.
3m-X50 Lamp will not light up. Changed lamp. 3m-X50 projector: Lamp will not light up. Changed lamp. Turned on then power and lamp light flashes red while fan starts to run in high speed. you have a ...
Question about InFocus Office Equipment & Supplies
...to warn you when it get's close to the end of the lamp's life. i think it's time to change the lamp and reset the lamp timer. if you don't change it, it'll blow while it's on and possibly
Question about InFocus Office Equipment & Supplies
...change the lamp??? I reset the timer again..it still says I need to change it? I'm on software version 1.0. Thanks. just to be sure you have the correct timer reset procedure: power the projector up, ...
change the lamp when i turn the projector on, also i cannot reset the lamp and filter timers? http://www.projectorcentral.com/pdf/projector_manual_2295.pdf Take out the power cord and put it back then
Question about Sony Office Equipment & Supplies
...lamp life is so variable, it really doesn't mean much. Just remember what the value was when you changed the lamp and subtract that from the new total to get your new lamp's
Question about Hitachi Office Equipment & Supplies
...sais change the lamp and that the the projector said change the lamp and that the light will be off soon . What can I do ? you need to buy a new lamp, and install it check manual for lamp ...
...go black and the "temp" and "lamp" alarm lights will flash on and off. I've changed the filter and we very recently changed the lamp (maybe 150 hours of use). if you are ...
27 questions posted
Usually answered in minutes!
23 Questions
30 Questions
27 Questions
15 Questions
22 Questions