Proton MM2701VT 27" TV "television sets repair" Questions

...Television (Model SE5759Y) -- it was working fine. The picture is still GREAT when it comes on. But ... now it won't come on. Is it time for a new TV or can this one be repaired? Thanks. Your set is ...

television and the tv just turned off. I turned it back on and about 5 minutes later it turned off again. Now when I try to power on, the standby light just flashes, but no picture or sound. Any ideas

...television has turned green with white horizontal lines across the screen. Can this be repaired? I have been told it might be the tube that needs replacing! Susie, you either have a shorted green ...

television screes and my number buttons on the remote are locked. Did you every get it fixed Olwethu-kant? I have the same problem This is telling you that, this set's "Brain" has found and diagnosed,

...television slid down off a stool that it was sitting on and got bumped in the front a little bit but there was no apparent damage except for when it got set up again, there is no sound. This is ...

repair this problem Make certain you are connecting a set top box to the television with an RCA cable (yellow,red,white). You cannot get PAL through the tuner with a coaxial cable on some televisions.

...part called a diode. You will will need to take to a repair shop if you are not trained to repair televisions. You could be electrocuted if you touch the wrong thing in the back of your tv set

toshiba 19b v500b bad picture picture very bright background very hazy.has been repaired 5 weeks ago under guarantee but has gone again The matric section of chroma processor has the fault.  If ...

television repair person. Ask for an estimate and a realistic appraisal of whether the set can be adequately fixed. Depending on the age and condition of your TV it may not be cost effective to repair

...television. Do I have a power transformer problem that will cost more to repair than what the TV is worth? Common causes for failures in TV sets are the power supply, and or scan circuit failures. ...