JBL GTO1004 Car Amp "protect light" Questions

...protect mode. If the power light blinks then goes off, the amp is either going into protect ... How do I fix my amp it keeps going into protection mode ... ? 2:00 ...

...when all have been verified to be in spec. then the protect light goes out & the power light comes on. If the protect light stays on then a fault exists within it's circuitry. Cheers,

...protect light comes on. If it does, then there are internal problems with the amp and will need to be repaired. If the protect light does not come on, then connect the ignition or switched +12 volts. ...

...protect light is on but the power light is not. help me please, hud Disconnect all speaker wires and signal cables from the amp. If it powers up normally (no protect light), the wiring needs to be ...

protect light dosent come on. What's wrong with it protect light only comes on when theres a short or bad earth as long as power light on your all good you never wanna see protect light on cheers mate

...protect light stays on and it wont let my amp work and when you take out the fuses the red light goes off If the protection LED lights only after the remote voltage is applied (head unit is switched ...

...protect light amp is bad and if you have no protect light continue to hook up each speaker one by one while amp is on till you get a protection light and that speaker would be the source of your ...

...protect light Protect light is on and it don't work. Was working fine then it just stopped working. When I checked the amp the protect light was on. What should I check??? Thank you fuses , ground ...

...light will still stay on. if i pull the 2 fuses on the side the Blue led lights will come on but the power and protect lights will stay off as soon as i have one of the 2 fuses pluged in the ...

...protect mode the light will come on. The red color is usually stop or warning etc ... green = go or good. Protection is a mode that the amp will go into if it overheats, or there is a short in a ...