Optoma EzPro 739 Multimedia Projector "replaced lamp" Questions

how to change lamp timer on sanyo plvz4 Hello* Turn the projector ON, and press the MENU button to display the on-screen Menu.  Select the 'setting' menu with point UP/DN button.  ...

...lamp housing needs to be replaced.It can be replaced and replacement lamp is also available. -------------------- Buying original lamp is always advisable.But there is compatible lamp also ...

i need to replace the projector bulb hi, for replacing the lamp do the fallowing. 1 turn off the projector and disconnect the AC power . allow the projector to cool for at-least 45 minutes. 2. remove ...

how do i replace the lamp remove the lamp door, remove the old lamp (2 or 3 screws), replace with new lamp, replace door, reset lamp timer (menu-settings-reset lamp timer-yes).

how do i replace the lamp remove the lamp door on the bottom, remove the lamp (2 or 3 screws), replace with new lamp, replace door, reset lamp timer (menu-settings-reset lamp timer-yes).

...and lamp light are green for replaced bad lamp, power and lamp light are green for about 1 min then turn red ,but the lamp does not come on at all Yes you need to replace lamp,so you buy a new

lost the manual - I am replacing the bulb how do I replace the bulb? What is the procedure? remove the lamp door, remove the lamp (2 or 3 screws), replace with new lamp, replace door, reset lamp timer

replaced of lamp with new one or used you must cheak the on screen image is smooth not a very very smooth but smooth no flashing no any abnormal view than lamp is faulty only otherwise power supply is

replaced lamp, reset LCD - still displaying replace lamp I've replaced the lamp, reset it and it works. But now, each time I go to use LCD, it displays replace lamp and has to be reset to omit message

indicator showing LAMP. Does this indicate the lamp needs replacing? Yes. The lamp is timed and the replacement indicator signals when the lamp is near end of life. If the lamp fails catastrophically ...