Optoma MovieTime DV10 Multimedia Projector "fan replacement" Questions

I just replaced a power supply, it has one fan instead of 2. Works great but now I get an error message saying it can't find the fan (which I'm no longer using), how do I get rid of the message? ...

Fan Replacement Cleaned Fan, Checked Voltage on Board. Everything is OK I am assuming fan needs replacement. 3108NL-04W-B50 12v DC 80mm And possibly 60mm as well Any idea where to order? Thanks!! If ...

...replacement fan, etc.? first vac and clean vents for proper air flow if still coding with unit unplugged remove cover and check fan for blockage if good and still fan code test fan, if bad fan is ...

...it sounds like it is loose, rattling or hitting something. Can either it or it's bearing be replaced: Check Panasonic's website service department for the cost and availability on the replacement

...fan from spinning then the least expensive course would be replacing the fans. If replacing the fans don't fix it it then the main board is the likely problem and on a projector that old you may ...

projector shuts down after a couple of minutes with lamp and temp lights flashin, is this a fan poblem and can i replace the fan? This probably the fan is not cooling down the temperature of the high ...

fan fail in1110 fan fail You should check first the fw version. Tha last fw version is v 3.2.4. if the fw is updated it, replace de fan, if fan is ok, replace ECA controller. InFocus IN1100 Projector

...replacement that can be purchased at... 80mm fan- part # 526-0192-00 about $10. find closest authorized service center from infocus website. I think you will find that the fan is ok, the problem is a ...

...the fan. however, nec does not sell parts. you'll need to send it in to them. unless you remove the fan and, using the part number on the fan, search the internet for a replacement. try

...replacement. The fan hooks up with +12V, Gnd, and a Sense line. No problem. I replaced the fan and the unit powers up just fine and spins all 3 fans nicely. However, after about 30 seconds the unit ...