Question about Computers & Internet
pc power off, I tried power on that, but not was posibble, I thinked power suply failed, then I changed this, but the pc continue without on. Note: I put the new and older power supply in other PC and
...pc power button. Try to boot the pc. 2. Open the case and reseat the graphics card, hard drive, and RAM. 3. Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM ...
Question about Foxconn Computers & Internet
pc doesn't power on at all. Iput the new and the old power supply in another PC, and these power on Seems like the motherboard is broken... Yous hould first try the PC with another motherboard, if you
...pc without power for 5-6 hours. But again if i restart , the problem arises. I checked my processor, RAM, HDD & power supply with another PC and they all work fine. Please can anyone give a idea ...
PC won't power on. Compaq SR5410F I'm trying to fix a PC for a friend of mine, but I'm having no luck. I get a green light on the back of the power supply (outside the case), but no fan's move and PC ...
Question about Intel Computers & Internet
...PC. Now that u have identified the power pins, put them back after cleaning the dust,etc. If the PC behaves as before but works perfectly when the power switch connections are opened & PC works ...
...PC should power off that very second. If the PC does not shut off than the PSU is bad. If it did shut down wait a few seconds. Press the cases power on button. The PC should start to boot up. Let it ...
...PC with the power connected. If the power supply on the PC has a switch on it you may use that instead of actually plugging and unplugging. Also you might try pressing and holding down the "ins" or ...
...pc power button (this discharges any residual power in the capacitors). 2. Open the case and reseat the graphics card, hard drive, and RAM. 3. Take out one of the RAM sticks if there is 2 or more. ...
Question about PC Chips Computers & Internet
...power cables with the PC Box - just to rule out power cable - this wont take but a second (I presume the monitor is powered on) 2. If it is not the power cable, let's look at memory. Take memory out, ...
265 questions posted
Usually answered in minutes!
138 Questions
103 Questions
99 Questions
77 Questions
88 Questions