Paradigm Monitor 70p Speaker "bi amp" Questions

...bi-amp There are 4 speaker posts HF+ HF- and LF+ and LF-. Can I use two amplifiers to drive these. Bi-wiring basically works wtih one amp. You need a crossover network and a signal doubler to use two ...

...my hdmi stuff and cd player please help With the CLS-215 speakers, you can Bi-Amp or Bi-Wire them. Here is how to Bi-Wire and Bi-Amp Speakers: ...

I have no problem yet, but want to avoid one. To bi-wire, should I remove the metal plates connecting the the two minus and plus terminals? Sincerely, R Absolutely remove them for bi-amp or bi-wiring

...at all? Or does it sound as though there is only low end frequencies? Also is the speaker in a bi-amped situation with a crossover? If you are not bi-amping and the speaker has a passive ...

how do i connect speakers This model of speakers have that bi connection at the back if you are not bi-amping the speakers, then connect both the reds together and both the blacks. The speakers ...

...Bi-Amp these speakers (SP-87) as I have lost my paperwork on them? Can you SEE the rear of them? Those jumpers are for disconnecting the speakers so you CAN bi-wire them. ...

...bi-amping", using a treble amp and a bass amp dedicated to each input. If the jumpers are missing, you can use a short piece of stripped speaker wire to reconnect the upper and lower binding posts, ...

bi amp capable speakers...if you have the jumper in place (connects top and bottom terminals together) it's set up for standard full range connection - you can use either set. If the jumper is not

...bi amp I have a set of vintage Infinity RS2 towers in good shape but I am interesting in converting them to allow bi-amping, The towers are RS2 (single set of speaker terminals) rather than the RS2b ...