...channels 7 and 11 by entering the number followed by the Enter key. If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the
Question about Philips Televison & Video
...tv remote? 10 Steps to Program Your Directv Remote 1. Turn on television. 2. Locate the switch at the top of your remote that allows you to toggle between receiver, auxilary, and TV modes. Slide ...
tv 2 and duel mode has no lights lit up.and tv 2 has snow on channel as if its not even hooked up to a sattelite. i checked connectivity wires they are fine and iin place.can you tell me what could be
...2. Press the red TV POWER button 3. Press and release the up arrow on the remote about once a second until the tv turns off. 4. When it turns off, press the # (Pound) button 5. Try powering the tv ...
tv button, once you are done check the secondary remote address, it should be 9 on the white box and 2 on the blue box, save the settings by using the remote 1, selct done on the screen and it will go
Question about DISH Network Televison & Video
...TV on. 2. Hold TV button on top of remote until all the mode lights turn on. 3. Let go and the TV button will blink. Enter the code found at link below and hit #. 4. Try the use the remote, if it ...
Question about DISH Network Televison & Video
tv button., you will notice that the secondary remote address was change from 2 to 9. to save the setting, get the remote1, select done on the screen and it will show a black or snowy screen. to check
Question about Televison & Video
teh blue up arrow onece every 2 seconds until you tv shuts off, ( dont go to fast or you will pass up code. as soon as your tv shuts off, press the pound key and your ready to go with power and volume
...with no video or the video will be towards the bottom of the tv screen why? The box just quite. We did unhook and moved television but it did work upon re-hooking. Next day just won't light ...
...TV button on top of the remote until all lights turn on. 2. Let go and it will blink. Enter code and press # 3. Try functions of remote. If works put SAT and you're good to go. If not then repeat ...
145 questions posted
Usually answered in minutes!
1,193 Questions
265 Questions
120 Questions
78 Questions