Xante PLATEMAKER 4 Laser Printer "print pdf prints landscape" Questions

...print PDF file in landscape mode to make it print properly - but it is a portrait mode document (so it should print sideways, still be in portrait mode but sideways thereby fitting on the paper. We ...

...printing a pdf. In landscape it only prints 1/4" left side. SET THE PRINTER TO IT'S DEFAULT SETTINGS IF YOU CAN If not I would unintal it , have a disk cleanup and a defrag then reinstall all ...

PDF file and can then print that file to your printer you will have better results, because the software your using might not be configured to work with this printer. PDF files will work great and you

...print command in the pdf file menu, not on the print command found in your internet browser window. Clicking on the browser print command may cause all kinds of problems, depending on how your ...

print a 56 page pdf form the only solution was to load the pdf into Adobe Acrobat and then in the 'document' pull down menu select 'rotate pages', then select '180 degrees' and also 'rotate even pages

...print a pdf the top inch is faded When I print or copy the top 1 inch to 1.5 inches of the page is light and faded? Why Mike does this happen with all prints? does it go away if you change the ...

...print, you can also check and change the printing settings like landscape, indents...etc... in case you need a little reading.. here is the manual in pdf form... here this is you printer right... if ...

...print and it comes out in the wrong orientation and clips the artwork Not familiar with the printer or if you are using Windows or Mac but there should be a page setup tab to set oriientation for ...

...print the same report to a PDF, the report is not cut-off. I have tried changing the properties of the Generic printer to landscape but that didn't help. Thank you! I found a solution to my problem ...

pdf page 33 has information to change the print settings and page 28 shows how to load the envelopes Check the index for anything you need help with or feel free to ask me, I am here to help Thank you