D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n "pre router" Questions

...you have to locate the reset button on the back of the router. While the router is turned on, press and hold the reset button for 10 to 15 seconds. Once released the router should reset. After ...

...no choice but to reset the router to factory defaults. Reset Procedure: With the router powered on, Press and hold the reset button (on the back of the router) for 10 seconds and release. The lights ...

Hi Guys , I uploaded new firmware and router was restarted while upload of new software. It never came back to work, Can anyone help pleaseemail me at [email protected] Reset your router to factory ...

reset verizon router password Click on reset button and hold it about 20 second after some your router will be reset .

how to resolve wifi access mode not supported an AP is used to extend you wireless range and will connect to your router to provide network and internet access. An AP by itself cannot connect to the ...

192.168.0.1 do not open page If the page does not open then you don't have a connection to the router. Make sure your cable is attached to the router and computer. You can't do the initial install ...

I'm trying to connect a Dlink 1360 to a desktop computer adn a laptop using a desktop switch. We use a 2 way sattelite connection. I have no clue so do I connect all the bits together? Thanks You can ...

cant open the link to setup the router Refer to page 3 of the Quick Install Guide listed on the web site below. There are multiple ways to configure this router and do not wish to provide HOW TO ...

i want change the password of my netgear wb802t? but i can't Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or ...

Router, open up a web browser. In the address field, type 192.168.2.1 (or the IP address you customized), then click Enter. In the menu at left, go to the wireless section and click Security. If asked