D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n "port modem connected opened" Questions

...port. 3. Step 3 Turn on your modem, router, and PC. Plug the power plug adapter into the modem. Turn on the modem. It'll take approximately 30 seconds for the modem to boot up. Connect the power plug ...

...Modem to the WAN port of the router. Connect another Ethernet cable from Router LAN port to computer LAN port. Power cycle all the devices (Turn on Modem first, then Router and at last computer). ...

...port. 3. Step 3 Turn on your modem, router, and PC. Plug the power plug adapter into the modem. Turn on the modem. It'll take approximately 30 seconds for the modem to boot up. Connect the power plug ...

...modem for instance) goes into the WAN port of the router/firewall, then you connect the AP to one of the LAN ports. Today it is often a better idea to buy a wireless router instead, i.e a router with ...

...connected my belkin router to everything the modem light became amber and started flashing and in the intallation cd it says that there is a problem with the modem Actually there is no problem with ...

lost my cd for net gear wireless-N Dual Band WNDA3100v2 how can i get another one Are you trying to set up router ? You can set up your router manually, without the CD. Make sure that your computer is

...port of the router. DO NOT connect the modem to the router. check the IP address of the computer again. Suppose the IP address of the computer is 192.168.A.B. Now make sure that both the IP addresses ...

Portforwarding: Incoming connections on port 80 not possible Hi, would be great if maybe someone had an idea regarding this: I set up the 2700 HG-E Gateway (Software version 4.25.43) for remote access

...connect to my router but i have the password and i dont know what i must to do? hook a cable to port 1 and then to your computer. open web browser and enter http://192.168.1.1 enter user info

port on cable modem to ethernet port 1 on ADSL Gateway. (Must be port 1) -Connect cat5 cable from computer NIC to other port on ADSL Gateway. -(You may need to) Start->Run->cmd ipconfig -release