Kenmore 16602 / 16604 / 16609 Built-in Dishwasher "high temp heat dry flashing" Questions

Ad

High temp, heat dry, high temp, heat dry" then closed the door firmly, and the dishwasher High temp, heat dry, high temp, heat dry" then closed the door firmly, and the dishwasher began running again!

Ad

Question about Dishwashers

1 Answer

...high temp wash and heated dry buttons on your dishwasher. If you do, press high temp wash, heated dry, high temp wash, heated dry in that order. This will run the service mode and reset the board. If ...

Ad

Question about Whirlpool Dishwashers

8 Answers

...high-temp, heat-dry, high-temp, heat-dry" all the lights came on and a few minutes later they started flashing in a sequence... then they all went out... then it was ready to run... thanks again... ...

Question about Whirlpool Dishwashers

4 Answers

...high temp wash then heated dry then pressed high temp wash then heated dry. in that order high temp wash, heated dry high temp wash heated dry. all pressed individually one by one. by pressing the ...

high temp wash, heated dry, High temp wash, heated dry, high temp wash, heated dry, high temp wash, heated dry, high temp wash"All the lights will go solid at which point you press cancel to reset the

...High Temp - Air Dry - High Temp - Air Dry; or Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry; or High Temp Wash, Heated Dry, High Temp Wash, Heated Dry. You will know that you have ...

Question about Kenmore Dishwashers

1 Answer

...high temp-wash) button and then ( heated dry) do that 3 times in that order within 5 seconds. So it looks like this: (high temp-wash) ( heated dry) (high temp-wash) ( heated dry) (high temp-wash) ( ...

Question about Whirlpool Dishwashers

2 Answers

...high temp wash -heated dry -high temp wash -heated dry Please do rate the solution if the issue is resolved or post a comment for further assistance. Thanks Rylee I just tried the high temp, heated ...

Question about KitchenAid Dishwashers

1 Answer

...are most likely bad. If heater, therms, and wiring check good its usually the control. When fixed press Heat dry- Normal-heat dry-Normal or High temp- air dry-high temp- air dry to reset

Question about Dishwashers

1 Answer

...High Temp - Air Dry - High Temp - Air Dry or Hi Temp Scrub, energy saver dry, Hi Temp Scrub, energy saver dry or high temp wash-heated dry-high temp wash-heated dry. Now let the unit run for 2-3 ...

Not finding what you are looking for?
Kenmore 16602 / 16604 / 16609 Built-in Dishwasher Logo

277 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

vince

Level 3 Expert

1704 Answers

Paul Carew

Level 3 Expert

3758 Answers

NOEL
NOEL

Level 3 Expert

8604 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...