Kenmore 16602 / 16604 / 16609 Built-in Dishwasher "3 hours run" Questions

...3 hours my kenmore dishwasher takes 3 hours to run. You may be running the sani-wash or heated drying. The heat element in these things takes a long time. Check these and turn them off - then try ...

...3 hours to run through programme 3 hours isn't "extremely" long. If you run a normal cycle, it should run about 2-2:30 hours normally with the drying cycle. Now if it's over 3 hours, that would be a ...

...3 HOURS WHIRLPOOL DISHWASHER QUIET PARTNER III. RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS ON A WHIRLPOOL DISHWASHER QUIET PARTNER III. common failures on that usually are the heating element. Look at ...

...hours like 3-4 hours and then I have to cancel the cycle manyally . Is it normal? I am very much confused about it. Kindly help me regarding this matter please . What is average time of a wash cycle? ...

...3 hours to wash and dry. trying to cut down the time. dishwasher shouldnt run 3 hours. never had this product before. Hi You should be able to find your manual ...

...3 to 3 1/2 hours make sure settings are correct like heat dry or whut not, hope this helps if not u could have a temp problem at water heater but this osunds like a older unit so u probably wouldve ...

...3 hours From start to finish, on the normal cycle, dishwasher runs at least 3 hours. This was not the case when we purchased it a few years ago. First check the inlet water flow into the machine. ...

...3 hours My dishwasher takes 3 hours which I think is crazy can you tell me why this is a 40 cycle takes thirty minutes which is not a great wash and next one is a 50 and that takes 3 hours Maybe its ...

...3 hours When I ran my dishwasher tonight it ran for 3 hours and was still not down running. Is this normal? It seems as though that is an awful long time for it to run. Pervious owners did not leave ...

...hours? It could be a program malfunction. Try changing the program in between a running program - 1. Press the "Start/Stop" button for at least one second. 2. Select the new program using the program ...