Alphasonik PSW110 Car Subwoofer "hook 2ohm" Questions

2ohm i want to hook them up to a soundstream trianchela amp it is a 1000.2 and they are 2ohm dvc subs how do i hook them up without blowing them or burning a voice coil With 2 ohm dvc a sub can output

2ohm woofer that i want to hook to a 2400 watt logic mono block 2ohm stable. i need to know how to wire my woofer This will help you :) Below is a link to the subwoofers manual where is clearly states

amp but im not getting the bass i think i should have,can u plz help me to hook this up,im a bass freek. Try checking the specs on the amp. It might not be able to drive a 2ohm load. just a suggestion

...2ohm speekers if u have a 4 ohm cross the positive to positive with short wire and cross negative and negative with short wire and then hook up the positive and negative from vc #1 to amp make sure ...

hook up the voice coils up to 2ohm stable? speaker voice coils. then to amp so my 2ohm amp will play right depends on the impedance of the coils on your subs and if they are single coils or dual coils

i hooked up my 2 dvc 12in subs to 1100 w interfire ib2900c 2ohm stable amp..however after hooked up subs make very loud bababababa sound when turned on ..what don i do to fix this? It's in your rca ...

...hook it up to 2ohm to the amp. And if i can add another 10 inch kicker rt 2ohm sub in the future. Do to the impedance Of your sub u can't run it @2ohms its going to either be @1ohm or 4ohms and your ...

...problem i have the 13w7 with a 2ohm 1600 watt amp how is the best way to hook up duel voice coil for the most power You should run the voice coils in series so you would load your amp with 3

...2ohm dvc subs. And 1 4ohm svc. Can i hook them up to a kicker cx 1200.1 amp. Pls help. Thnk u Not if you want it to sound good. All speakers should match so equal sound comes out of each. More info ...

...have two cvr 12s in wich are 4ohm speaker but I have a 2ohm spl 1000 watt amp 4 ch how should it be hooked up This site will answer all your problems. http://www.kicker.com/svc_wiring I also gave you ...