Kenmore 24 in. 16059 Built-in Dishwasher "check door switch 665" Questions

Ad

Question about Kenmore Dishwashers

1 Answer

Kenmore 665 dishwasher problems replaced the thermal fuse kit on this model 665 after the dishwasher quit working. I still can not get it to run. Help what next Check the door latch and switches.

Ad

Question about Kenmore Dishwashers

1 Answer

no lights are on and it does not work is there a reset button or fuse for this problem. model #665-17464300 Check the door switch. It will shut off all power to unit.

Ad

Question about Kenmore Dishwashers

1 Answer

...check the circuit breaker at the electrical panel to make sure the breaker didn't trip. Open up the door to the electrical panel and look for a switch marked "dishwasher" or "kitchen outlets." Switch ...

...665 dishwasher. The clean light is flashing (7 times) and the machine won't run. Have pulled the control panel and checked the door latch switches and they appear fine. No obvious burned wires any ...

Question about Kenmore Dishwashers

1 Answer

door switch in the console. But you did hear a hum sound when it tryed to drain, it could be the drain solenoid, or the motor/pump assembly. Take off the bottom access and look at the solenoid when it

Question about Kenmore Dishwashers

2 Answers

...door. The thermal fuse is located on the top right side. Remove the wires from the fuse. Use a volt neter set for continuity to test the fuse. No reading is a bad fuse. This link will show the fuse. ...

...Check the door switch: Make sure that the door switch is not stuck in the closed position. Check the wash impeller: Make sure that the wash impeller is not clogged or malfunctioning. Contact Kenmore ...

Question about Kenmore Dishwashers

2 Answers

...door latch. First of all, check the "strike" - that's the part that sticks out from the top of the dishwasher that goes into the latch in the door. That part is supposed to press down on the latch ...

door switch thats causing this or the main wire is loose..be careful as you do have 115 volts. i'd turn off power and check where power comes into d/.w and make sure the wire nuts are tight.. the next

Question about Kenmore Dishwashers

1 Answer

...check the heater circuit. Does anyone have any other information on this problem? If the clean light flashes 7 times, pauses, then repeats... When the dishwasher doesn't sense a water temperature ...

Not finding what you are looking for?
Kenmore 24 in. 16059 Built-in Dishwasher Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3808 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...