AudioBahn DUB Mag Audio DUB2502 Car Audio Amplifier "speaker inputs" Questions

Ad

Question about Audiovox Car Audio & Video

1 Answer

...With a 4-pin connector - from left, facing the side of amp with RCAs and high level input: Left speaker + input, Left speaker - input, right speaker - input, right speaker + input With 5-pin ...

Ad

...speaker lines directly to the RCA inputs of your amplifier. But you can connect them to your amplifier if your amp has a high level input. Most of the time it looks just like the speaker jacks of the ...

Ad

Question about Blaupunkt Car Audio & Video

2 Answers

...inputs then you run the speaker wires directly to the amplifier. If not you would have to get a line level converter also known as a high low 2 convert speaker wires to RCA at that point you connect ...

Can I splice rca wires into factory speakers to power amp No,  the voltage level that goes to your speakers is way too high,   You will damage the input circuit on your amp.    You

Question about Sony Car Audio & Video

1 Answer

...to accept the speaker level signal from a head unit. This is generally no more than 20 watts RMS. If you drive the inputs with more than 20 watts, you risk damaging the input circuits of the

Question about Car Audio & Video

3 Answers

...speaker inputs. my cd player has rca amp speaker line(no cd input line) is it ok to forget about about the cd input? And it has the 16 pin connector. do i wire up the ground, acc, and battery without ...

Question about Koiiler Car Audio & Video

1 Answer

...speaker inputs/outputs first and just leave the 12v wire, remote wire and ground wire connected. Turn on your radio and if the protect light goes out, then there's a problem with one of your ...

...that the circuit board inside gone to malfunction. If the unit power up fine, then the fault is either on the speaker or on the inputs. Check the speakers and inputs connector for ...

Question about Hifonics Car Audio & Video

1 Answer

protection fail DISCONNECT THE SPEAKERS AND ALSO DISCONNECT THE RCA INPUTS. POWER THE AMPLIFIER UP AND SEE IF IT GOES INTO PROTECTION. IF IT DOES, MAKE SURE ALL POWER CONNECTIONS ARE GOOD AND IF SO, ...

Question about Kenwood Car Audio & Video

1 Answer

...best way to hook up a kenwood 729s with no rca outlet on radio/cd player? Right On! You can run the speaker wires to the speaker level input on the amp or i believe you can run another set of speaker ...

Not finding what you are looking for?
Car Audio & Video Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top AudioBahn Car Audio & Video Experts

Jerry Naidoo

Level 2 Expert

152 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you an AudioBahn Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...