...leaking underneath during spin cycle We have a 2-year old GE Profile washer Model WPGT9350. It is leaking water underneath during the spin cycle.We checked -- the hose is not leaking the water. Would ...
...underneath washer? Amana model ALW480DAW Serial #10076307AL started leaking during the drain cycle and has become loud during the spin cycle. What would cause this can it be fixed? u have to access ...
...underneath. Inspect the bottom of the gear case for evidence of oil. If oil is present, the oil may have leaked onto the spin clutch causing it to slip during your final spin. The transmission and ...
Question about GE Washing Machines
...underneath so I prefer not to have the water running when I test it. There are two broken rubber arms that stabilize the tub when it spins. Could this cause water to smash out? What do you think? ...
...underneath the machine. My Maytag MAV7600 is leaking during spin and agitation cycles. It appears to be dripping from the metal housing that mounts the black plastic tub. I tore everything down and ...
Question about LG Washing Machines
...leaking underneath during the spin cycle check the hoses and clamps under the washer and the tub also as it may have a hole or crack in it? also check the water inlet valve as it may be leaking from ...
MY WASHERS LEAKS WATER FROM UNDERNEATH DURING THE SPIN CYCLE Check the water pump shaft seal for leakage (watch while the unit is spinning). Also check the hoses and connections at the pump.
...Leaking from underneath, when not in use, or intermittently Leaks out of the door you could also try this link might help you. Why does my washing machine leak only during the spin cycle and if you ...
...leaking underneath during the spin cycle. I took off the 2 front panels. I saw the water leaking from a large metal part that spins around. Its behind the motor and is attached via pully to the motor ...
Question about Kenmore Washing Machines
underneath machine. Makes buzzing noise in the wash cycles. The pump is likely damaged if it was leaking. Look for a ring of melted plastic on the face side of the pump. Check to make sure the hole is
36 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions