Kenmore 22422 Top Load Washer "whirlpool agitator working right" Questions

Ad

...whirlpool washer will agitate on the bottom half only while the top half is still. When the washer was working right, the top of the agitator would rotate clockwise and the bottom would move back and ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...Whirlpool top loading washer will not agitate but fills, bypasses the agitation, spins, rinses and does the final spin. The coupling is fine and the agitator will turn freely to the right and catch ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...Whirlpool has a split agitator design. The upper portion is called the auger, while the bottom is called the agitator. Between these components is a agitator cam assembly. This problem is commonly ...

Question about Whirlpool Washing Machines

2 Answers

...right direction. thanks Pop the top cover off the agitator to access the 4 agitator dogs. They must be replaced. I have a Kenmore top load washer stylemaster 909209. My clothes get tangled up with da ...

Question about Kenmore Washing Machines

1 Answer

...agitator keeping the drum from spinning. A set of Whirlpool Agitate Cams (part number 62580/01) cost about $15.00. It's a bit messy to fix (15 oz. of 80-90 weight gear oil in the transmission ...

Question about Whirlpool Washing Machines

1 Answer

...Whirlpool LBT6133AWO CC4104141 Everything works except the agitator post. THe agitator in the bottom of the tub works, but the agitator arm is so loose that it doesn't move and therefore the clothes ...

...right off. I assembled the agitator parts as per instructions. the whole project didn't even take 30 minutes. the washer worked perfectly. I washed a heavy load to be sure it could still agitate. In ...

Question about Kenmore Washing Machines

1 Answer

...agitator and shaft are OK, the problem may be in the transmission. See the following Whirlpool / Kenmore installation and service manual for top load, direct drive washers. ...

...agitator cam and follower use the same whirlpool part number 62580/01. This is a plastic set used to raise the agitate gear on the shaft. Pull the transmission. Remove the clutch (the spring holding ...

Question about Washing Machines

1 Answer

It is a whirlpool with the automatic water level control. well the auto water control is not working right,,,,it should be,,water first then wash,, its going to rip your cloths up for you one day????

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

1,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...