electronic 90 series my washer will not start hi..sounds like a fuse or circuit breaker problem.if it still continue with the problem then you may have a lid switch problem. check this out.. thank u..
Question about Kenmore Washing Machines
...90 Series Kenmore Washer Not going to spin cycle not draining I've had the same problem...you can purchase a replacement lid switch at your local appliance parts store for about $35. Fortunatly, the ...
Question about Kenmore Washing Machines
...90 washing machine stops midway through the rinse cycle This problem occurs on all wash cycles-normal, permanent press and will not advance to drain or spin. Hi, faulty timer motor or timer, knob you ...
...electronic 90 series washer The problem is it seems like the top portion of the aggitator just spins freely and only the bottem actually turns when its running in a cycle easy easy you need agitator ...
Question about Kenmore Washing Machines
...90 series washer. What would be the symptoms of a bad start capacitor It is many years since I have encountered a washer motor fitted with a start capacitor. Multi-speed induction type motors are ...
Question about Washing Machines
90 Series Model #110.26912691 Will not drain/spin. Yesterday, the load was out of balance. I opened the lid, redistributed and started closed the lid. Nothing happened. Have tried changing cycles with
...90) only designate the number of "Bells and Whistles" that a washer has and don't reflect the model number. See the following for where to find the model number: ...
Question about Kenmore Washing Machines
...Electronic 90 Series Washer: What is error code FF? Whatever it is, it's kept my clothes washer from working. I don't really want to pay for a service call if it's a part I can replace. On the other ...
...90 series washer that overflows. What is happening is that during the initial fill, it shuts off. However, part way through the agitation cycle, it adds more water and would overflow unless I stopped ...
90 NON electronic starts then stops after 5-10 seconds, then 2minutes or so will run again for 5-10 seconds It appears your timer/main controller/CCU has failed in this instance. For replacement parts
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions