...hinge Hi there is a plastic band around the rubber seal to take it off you would need a small screwdriver and prise it open gently than lift off the rubber and replace the door switch to put back the ...
Question about Maytag Washing Machines
...hinge so don't put it back too far. The bag should be on the left side. Just push the rubber seal on the top back a bit. If the bag is empty due to a previous repair, it maybe located under the back ...
...Put the clips that hold the motor in place and plug in the harnesses. Put the pump back on and the clips to hold it in place. Set the cabinet back on the frame. Make sure the lip on the front cabinet ...
...Put the clips that hold the motor in place and plug in the harnesses. Put the pump back on and the clips to hold it in place. Set the cabinet back on the frame. Make sure the lip on the front cabinet ...
...Put the clips that hold the motor in place and plug in the harnesses. Put the pump back on and the clips to hold it in place. Set the cabinet back on the frame. Make sure the lip on the front cabinet ...
...that gets ganged up over time.use washing up liquid warm water old toothbrush and QTips.make sure you put the upper tube back over the lower tube of softener section before clipping down.please
...hinge put the 2 halves back 2gether screw the screws back up and remount the door 2 the cabinet jobs a gooden good luck same problem here. all say split 2 halfs but no one is saying how to split ...
put in ' traps'-things which indicate that a seal has been broken from someone messing around with something that needs a technician's expertise. Remember that this is Not Your Mothers'
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions