Kenmore 44042 Front Load Washer "water sensor" Questions

Ad

Question about Kenmore Washing Machines

2 Answers

...Water temp sensor failure If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, the "F/05" error code will be displayed. Possible ...

Ad

Question about Kenmore Washing Machines

1 Answer

WATER TEMPERATURE SENSOR ERROR If the water temperature sensor (NTC) value is out of range (23F to 217F[-5C to 103C]) during the water-heating step of the WASH cycle. NOTE: To find correct Ohm reading

Ad

Question about Kenmore Washing Machines

1 Answer

...Water temp sensor failure If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, the "F/05" error code will be displayed. Possible ...

Question about Kenmore Washing Machines

1 Answer

...WATER TEMPERATURE SENSOR ERROR If the water temperature sensor (NTC) value is out of range (23°F to 217°F[-5°C to 103°C]) during the water-heating step of the WASH cycle. NOTE: To ...

Question about Daewoo Washing Machines

4 Answers

...water level sensor Change the water level sensor (sensor pressure) is low. (sensor pressure). The drain motor does not work -  Test and if faulty change the drain pumpMessage = E9 Error = SENSOR ...

Question about Washing Machines

1 Answer

...water temperature sensor error or enought hot water to the washer. check to see you have both valves are turned on. Also, the water inlet valve on the washer has a screen and it is known to get ...

Question about Hotpoint Washing Machines

1 Answer

water level sensor, included to check the small hose from the drum to the water level sensor. there must be pressure from the water to suppress these sensors, the operation of the washing machine are:

...water sensor. - Plug in washer or reconnect power. - Verify the washer operation by running the Diagnostic Test cycle. - After the diagnostic test has finished, unplug washer or disconnect power and ...

Question about Speed Queen Washing Machines

1 Answer

...water level sensor is defect, or a cable got lose. or the tube connected to the sensor is leaking air. Lots of causes. But please first close the water tap. Then try t drain the water. Perhaps like ...

...sensor above water level--say in a bucket of water then lift it out of the bucket if the mains water flows or stops flowing depending on whether the sensor is in or out of the water will indicate it ...

Not finding what you are looking for?
Kenmore 44042 Front Load Washer Logo

114 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...